Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

Porous MoO3@SiC hallow nanosphere composite as an efficient oxidative desulfurization catalyst

A novel N‐doped MoO ₃ @SiC hollow nanosphere has been synthesized through two steps. Due to the first step, N‐doped MoO₂@C nanosphere was synthesized using the hydrothermal method and in the second step, Si‐C bonds were formed through the low‐temperature magnesiothermic method and MoO ₃ @SiC hollow nanosphere was produced. The prepared nanostructures were identified by various techniques such as IR, XRD, XPS, BET/BJH, SEM/EDS, and Raman spectroscopy. Results show that converting of C to SiC increase the surface area from 17 to 241 m²/g with remarkably decrease in pore diameter. Also, molybdenum is present in the form of MoO₂ in carbon catalyst while during magnesiothermic process, it transfers to MoO₃ form in the SiC catalyst. The synthesized products were employed as catalysts in oxidative desulfurization of model fuel. The results displayed that MoO ₃ @SiC hollow nanostructure shows a superior catalytic activity (99.9%, 40 min) compared to C support (56%, 60 min). Furthermore, the recycling of MoO₂@C catalyst shows a dramatic decrease even after the first run, while, SiC support exhibit higher stability during the stronger interaction between molybdenum catalyst and SiC support.     

Synthesis of a Pentacene‐Type Silaborin via Double Dehydrogenative Cyclization of 1,4‐Diboryl‐2,5‐disilylbenzene

A new pentacene‐type silaborin, in which three benzene rings are bridged by silicon and boron atoms, has been synthesized and characterized by using NMR spectroscopy and X‐ray crystallographic analysis. The precursor, 1,4‐bis(dimesitylboryl)‐2,5‐bis(phenylsilyl)benzene ( 4 ), was prepared by stepwise introduction of a silyl group and a boryl group to a benzene ring starting from 1,4‐dibromobenzene. Double cyclization of 4 proceeds by a H‐Mes exchange and a B‐H/C‐H dehydrogenative condensation to afford pentacene‐type silaborin 5 . X‐ray crystal structure analysis reveals that 5 adopts a bent structure rather than a planar one. UV/Vis spectra and DFT calculations for 5 reveal a lowering of the LUMO energy level compared with corresponding anthracene‐type 3 .     

Non‐coordinating‐Anion‐Directed Reversal of Activation Site: Selective C−H Bond Activation of N‐Aryl Rings

An Rh‐catalyzed selective C?H bond activation of diaryl‐substituted anilides is described. In an attempt to achieve C?H activation of C‐aryl rings, we unexpectedly obtained an N‐aryl ring product under non‐coordinating anion conditions, whereas the C‐aryl ring product was obtained in the absence of a non‐coordinating anion. This methodology has proved to be an excellent means of tuning and adjusting selective C?H bond activation of C‐aryl and N‐aryl rings. The approach has been rationalized by mechanistic studies and theoretical calculations. In addition, it has been found and verified that the catalytic activity of the rhodium catalyst is obviously improved by non‐coordinating anions, which provides an efficient strategy for obtaining a highly chemoselective catalyst. Mechanistic experiments also unequivocally ruled out the possibility of a so‐called “silver effect” in this transformation involving silver.     

Design and synthesis of the honeycomb PtSnNa/ZSM-5 monolithic catalyst for propane dehydrogenation

A novel PtSnNa/ZSM-5 monolithic catalyst was designed and synthesized for the propane dehydrogenation reaction, which was a significant transformation in industry. Experimental results showed that although the propane conversion and the propylene selectivity gradually fell down along with the reaction time, the descent speed of the PtSnNa/ZSM-5 monolithic catalyst was slower than that of the granule catalyst and the propane conversion and propylene selectivity of the reaction with monolithic catalyst still remained at a high level after 12 hr. The monolithic catalyst had regular pore structure that facilitated the separation of the product from the catalyst and reduced the limitation on internal and external diffusion and mass transfer, and led to the high catalytic activity and stability. The catalyst could be easily fabricated and was of highly industrial application potential.     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

Gold-Catalyzed Cross-Coupling Reactions: An Overview of Design Strategies,Mechanistic Studies,and Applications

Transition-metal-catalyzed cross-coupling reactions are central to many organic synthesis methodologies. Traditionally, Pd, Ni, Cu, and Fe catalysts are used to promote these reactions. Recently, many studies have showed that both homogeneous and heterogeneous Au catalysts can be used for activating selective cross-coupling reactions. Here, an overview of the past studies, current trends, and future directions in the field of gold-catalyzed coupling reactions is presented. Design strategies to accomplish selective homocoupling and cross-coupling reactions under both homogeneous and heterogeneous conditions, computational and experimental mechanistic studies, and their applications in diverse fields are critically reviewed. Specific topics covered are: oxidant-assisted and oxidant-free reactions; strain-assisted reactions; dual Au and photoredox catalysis; bimetallic synergistic reactions; mechanisms of reductive elimination processes; enzyme-mimicking Au chemistry; cluster and surface reactions; and plasmonic catalysis. In the relevant sections, theoretical and computational studies of Au^I/Au^III chemistry are discussed and the predictions from the calculations are compared with the experimental observations to derive useful design strategies.     

RhIII-Catalyzed Double Dehydrogenative Coupling of Free 1-Naphthylamines with α,β-Unsaturated Esters

The Rh^III-catalyzed, consecutive double C−H oxidative coupling of free 1-naphthylamine and α,β-unsaturated esters through C−H/C−H and C−H/N−H bonds is reported. The one step reaction leads to the formation of biologically important alkylidene-1,2-dihydrobenzo[cd]indoles scaffolds. This efficient process is much more synthetically convenient and useful than others because the starting materials, such as 1-naphthylamine derivatives are readily available and the free amine serves as a directing group.